Automatic Transmission Fluid (ATF) Additive Package PETRONAK GCK 1143U
1. Performance Introduction:
Automatic Transmission Fluid (ATF) Additive Package PETRONAK GCK 1143U, high quality and ashless, is specially designed to meet the requirements of Dexron-III, Mercon ATF specification, and it also meets the requirements of Allison Transmission Division C-4 and Caterpillar TO-2 specification, It holds good anti-wear, anti-oxidant and anti-friction properties. It is compatible with base oil II or above and synthetic oil, and it is suitable for blending Automatic Transmission Fluid which could meet requirements of Dexron-III,Mercon/C-4 as well as low temperature viscosity.
It holds excellent oxidation stability, thermal stability and detergency properties, prevents the formation of paint membrane, greasy filth and carbon deposits.
Perfect anti-friction makes it easier to shift gear.
Perfect anti-foaming makes sure power transmission effectively.
Perfect low temperature fluidity and good adaptability with rubber seal material could protect sealed materials from leakage effectively.
2. Properties:
The product meets the requirements of below specifications:
GM Dexron-Ill
Ford Mercon
Allison C-4
Caterpillar TO-2
3.Application:
It is used for automatic gear-shift system and hydraulic transmission system oil.
It is also suitable for aytomatic transmission system, power steering system and other – hydraulic system oil in the field of construction machinery.
4. Typical Value:
ITEM | Typical Value |
---|---|
Density (20 ̊C), kg/cm³ | 0.9 – 01.1 |
Kinematic Viscosity at 40 ̊C, mm²/s | 30 – 45 |
Flash Point, (open)/C | >100 |
Sulfur m % | >2.5 |
Phosphorus, m % | >1.5 |
Nitrogen, m % | >1.0 |
5. Reference dosage:
5.5%
6. Package:
Net weight: 200KG/Metal drum
7. Storage and Delivery
During the strong, loading and unloading and blending, it should refer to SHITO164
The highest temperature should not exceed 75 C, while the highest temperature should not be more than 45 C during long-term strong
The product is non-flammable, non-explosive and non-corrosive
Do not need special protection
It is the same as common petroleum products in safety, environmental protection and using, etc