PPD (D-Or 1333)

PPD LX250

DESCRIPTION

CRISTOL-PPD LX 250 is a pour point depressant to provide the most cost-effective solution to keep your automotive lubricants flowing in the cold. It provides the versatility you need to effectively treat the wide range of new generation base stocks available in the market today and thus permits product rationalization. It is highly recommended for use in a wide variety of engine oils, gear oils, hydraulic and transmission fluids.

Typical Physical Properties

FormOrganic Viscous Liquid
ColorYellow to Amber
Specific Gravity @ 25° C0.86 – 0.90
Flash Point>120° C
Viscosity @ 100  ̊C> 100 cst

Typical Dosages In Finish Lubricants

Engine Oils0.1-0.5% w/w
Gear Oils0.2-1.5 % w/w

PERFORMANCE CHARACTERISTICS

POUR POINT DEPRESSION

CRISTOL-PPD LX 250 has been evaluated (as per ASTM-D97) on various international sources of light and heavy base stocks. The average effect of increasing treat rates is tabulated in the table given below:

Dose (%)Core 100
Group I
Core 600
Group I
Cheveron 100R
Group II
Flint Hill-230 HC
Group II
0.00-21-0.6-12-15
0.10-21-12-27-30
0.25-27-18-30-30
0.50-30-21-33-33
1.00-30-24-36-36

FLUIDITY IMPROVEMENT

CRISTOL-PPD LX 250 is also used as a fluidity improver in lubricants which must meet stringent low temperature viscosity requirements under low shear rate conditions such as engine oils, hydraulic and transmission fluids and gear oils.

BASE STOCK SOLUBILITY AND COMPATIBILITY

CRISTOL-PPD LX 250 is completely soluble in all new generation base stocks at any concentration. In finish lubricants they are compatible with other commonly used additives.

TestUnitSpecificationResults
AppearanceVisual InspectionTransparent Viscous Liquid
Kin Viscosity @ 100 ̊CcSt>100135
Flash Point ̊C(COC)  ̊C>120182
Specify Gravity @ 25 ̊C C֯0.86 – 0.900.884
ColorYellow to AmberYellow